The lifting capacity is powered up to 4.0 tons! The 3-segment arm supports a wide range of vehicle lifting points!
The lifting points of a car vary depending on its maker and model, but the SKY MAX Ⅲ uses a 3-segment slide arm to expand the swivel range of the arm, enabling reliable lifting of even a short-wheelbase light one-box car, which was difficult to achieve with the conventional machine!
Increased arm rigidity!
The increased rigidity of arms and posts boosts lifting capacity to 4.0t! You will be able to work more securely and safely.
Equipped with a 3-segment slide arm as standard!
It can accommodate a wide range of lifting points from light vehicles to SUVs.
Realizes a wide swivel range!
The 3-segment slide arm has a wider swivel range than ever before, so it can handle everything from short-wheelbase light one-box cars to large SUVs.
* Depending on the model, an extension attachment or frame attachment may be required.
Also applicable to cars equipped with an aerodynamic package!
While maintaining the lowest attachment position of 98mm high, the arm portion has been made thinner to ensure more clearance between the upper surface of the arm and the side sill when supporting the vehicles.
Even vehicles with low side sill, such as those equipped with an aerodynamic package, can be lifted up without worrying about interference with the arm.
* Attachments that support the aerodynamic package may be required depending on the vehicle model.
Spacious workspace
The maximum lifting height of 1,800 mm allows even tall workers to work comfortably.
In addition, since the floor surface of the gantry lift is flat, it is easy to move in and out the work trolleys and oil drains, which improves workability.
Double and triple safety devices
Equipped with a rack-type mechanical anti-descent device not only on the drive side but also on the driven side. There is no need to worry about sudden descents even in the unlikely event of chain breakage or other accidents.
In addition, both the front and rear arms are lock-free for convenience at the lowest position, but they are automatically locked during ascent.
A strong chain is used!
Adopts a BL chain that is used for heavy loads!
The tensile strength is 1.5 times greater than that of an AL chain, and the chain is less prone to stretching, which prevents left-right synchronization differences.
Rich attachments
- Extension attachment (4 pieces each L/H side)/LM8385-0100
- Frame attachment LA (2 pieces)/LM8200-0300
- Frame attachment HA (2 pieces)/LM8200-0400
- Aero-compatible attachment/LM8200-0800
- Attachment storage bracket (2 pieces)/LM8330-0100
- Arm accessory bracket (4 pieces)/LM8330-0200
- Reel bracket attachment for 2-post lift/LM8200-0100
- Reel bracket attachment for gantry 2-post lift/LM8204-0100
